Skip to content

YO9EAT

🇷🇴 𝕭𝖔𝖌𝖉𝖆𝖓

  • Who’s YO9EAT
  • Awards
  • Links

Category: Hardware

Things to do with hardware, soldering and all that.

µBitx v5 power testing with the ATU 100

2020-11-202020-11-15YO9EATatu100, ubitxHardwareLeave a Comment on µBitx v5 power testing with the ATU 100

So, after finishing up my ATU 100, it was time to … you know, actually use it. As I got the ATU 100 to pair up with my µBitx v5, this is what I used to test. Output was into the previously built dummy load, ran two batches of tests: first with 12V into the…(Continue Reading)

Easy 50Ω 50W dummy load

2020-11-172020-11-15YO9EATdummy_loadHardwareLeave a Comment on Easy 50Ω 50W dummy load

Well, as I’m pretty much out of radio activity due to cold weather (no more balcony fishing pole) and the magloop build fail, it’s time to catch up on some backlogged projects. One year after getting my ticket, it’s time to build a dummy load ! Now, there are many ways to do this and…(Continue Reading)

Built the ATU 100

2020-11-152020-11-15YO9EATatu100Hardware1 Comment on Built the ATU 100

So, I wanted to add an ATU to the µBitx v5 I have. Because I’m cheap an amateur hobbyist (and I like putting kits together), the decision went to the N7DDC ATU 100 tuner. I got the kit from Aliexpress. The case is from Thingiverse. good quality PCB, no problems in soldering all SMDs already…(Continue Reading)

A 50% successful magloop

2020-11-06YO9EATantennasHardware1 Comment on A 50% successful magloop

So, winter’s coming which means I can’t keep a balcony window open for hours, in order to keep my fishing pole based EFHW outside. As many of you already know, balcony dwelling isn’t really compatible with HF antennas due to lack of proper space. The only acceptable antenna for apartment dwellers in the winter is…(Continue Reading)

Anything to 13.8V

2020-10-192020-10-19YO9EAThardware, portableHardwareLeave a Comment on Anything to 13.8V

As you know, many/most transceivers want a 13.8 V input – charging voltage of a standard NiMH battery. This does not really match the modern world of LiIon/LiPo chemistry, on which a single cell can have between 3.3 to 4.2V – meaning an 3S pack would be 9.9 to 12.6V (too low) and an 4S…(Continue Reading)

My v5 µBitx

2019-12-062020-11-15YO9EAThardware, ubitxHardwareLeave a Comment on My v5 µBitx

Awesome, cheap, 10-ish watt HF transceiver with open-source software. Take a look at how I built mine.

Recent Posts

  • FT8 2020.12.04
  • FT8 2020.12.02
  • µBitx v5 power testing with the ATU 100
  • Easy 50Ω 50W dummy load
  • Built the ATU 100

Recent Comments

  • µBitx v5 power testing with the ATU 100 – YO9EAT on Built the ATU 100
  • Easy 50Ω 50W dummy load – YO9EAT on A 50% successful magloop

Categories

  • DigiModes (57)
  • Generic (1)
  • Hardware (6)
  • SDR (7)
  • Software (3)
Copyright © YO9EAT 2019-2020 All rights reserved
↑